— Gas & Oxygen Analysis
— Moisture Analysis
— Liquid Flowmeter
— Gas Flowmeter
— Gas & Oxygen Analysis
— Moisture Analysis
— Liquid Flowmeter
— Gas Flowmeter
— Gas & Oxygen Analysis
— Moisture Analysis
— Liquid Flowmeter
— Gas Flowmeter
Gas & Oxygen Analysis
An oxygen transmitter for use in:
- Inerting/blanketing liquid storage tanks
- Reactor feed gases
- Centrifuge gases
- Catalyst regeneration
- Solvent recovery
- Landfill gas
- Sewage wastewater digester gas
- Oxygen purity
A thermal conductivity gas transmitter for use in the following industries and applications:
- Metals Industry
- Petroleum Industry
- Chemical Industry
- Methane Industry
- Landfill/Biogas Industry
- Gas Production Industry
- Food Industry
An oxygen transmitter for use in:
- Glove box purge and leak detection
- Natural gas
- Semiconductor wafer machines
- Coating process machines
- Membrane air separators
- Inert welding gases
- Pure gaseous hydrocarbon streams
- Process monitoring of gaseous monomers
- Heat treating and bright annealing
The nondepleting oxygen cell is a couloumetric electrochemical oxygen sensor used for oxygen measurement in the following industries and applications:
- Petrochemical Industry
- Gas Production Industry
- Metals Industry
- Semiconductor Industry
Moisture Analysis
This multichannel analyzer measures moisture in gases and non-aqueous liquids and oxygen (optional) in gases. Designed for permanent installations, it is used in conjunction with Panametrics Moisture Image Series and M Series moisture probes for industries and applications including:
- Petrochemical
- Natural gas
- Industrial gas
- Semiconductor
- Furnace gas/heat treating
- Power generation
- Air dryer
- Pharmaceutical
- Aerospace
Deliver an accurate moisture measurement with the Panametrics pro.IQ. The new moisture analyzer packaged solution simplifies the selection and installation of your moisture analyzer. Only a few simple steps; install the moisture transmitter, and connect your loop power and sample gas or liquid to the inlet fitting and you are ready to measure. Other benefits include:
- IP66 and NEMA 4X package
- The moisture transmitter, sample system and Zener barrier (if ATEX Zone 1 or Class I Div. 1 hazardous area option selected)
- Features the HygroProII moisture transmitter
- Sample system provides isolation, filtration, pressure indication on gas systems and flow indication on both gas and liquid systems. Enclosure is available in 304SS and 316SS and has a clear door for viewing all readings. Optional heater is also available
This Panametrics single-channel analyzer measures moisture in process gases. Designed for installation in industrial settings, it is used in conjunction with IQ.probe and M Series moisture probes for industries including:
- Industrial gas
- Furnace gas/heat treating
- Power generation
- Air dryer
- Pharmaceutical
- Aerospace
This rugged, intrinsically safe, portable hygrometer measures moisture in gases and non-aqueous liquids. It is used in conjunction with Moisture Image® Series (MIS), TF and M Series moisture probes for applications including:
- Natural gas
- Chemical and petrochemical gases
- Non-aqueous liquid applications
- Air separation plants
- Tanker preparation and filling
- Industrial gases
- Gas cylinder preparation and filling
- Shipboard applications
- SF6 circuit breakers
- Furnace gases/heat treating
- General plant/facility maintenance
The Aurora 19 analyzers have an intuitive interface that makes them easy to learn, configure and operate.
With a local service team to support them, you have the confidence of knowing that Aurora 19 analyzers are always ready for immediate moisture measurement.
With power and gas lines easily connected, the Aurora 19 moisture analyzer provides a wide range of reliable measurement with accuracy and fast response you need for immediate alerts to process upsets or out-of-compliance moisture concentrations.
This aluminum oxide moisture transmitter measures moisture concentration in gases and non-aqueous liquids from trace to ambient levels. It is suitable for a wide range of industries:
- Petrochemical
- Natural gas
- Industrial gas
- Semiconductor
- Furnace gas/heat treating
- Power generation
- Air dryer
- Pharmaceutical
- Aerospace
This aluminum oxide moisture transmitter measures moisture concentration in gases and non-aqueous liquids from trace to ambient levels. It is suitable for a wide range of industrial applications including:
- Petrochemical
- Natural gas
- Industrial gas
- Semiconductor
- Furnace gas/heat treating
- Power generation
- Air dryer
- Pharmaceutical
- Aerospace
This explosionproof aluminum oxide moisture transmitter measures moisture concentration in gases and nonaqueous liquids from trace to ambient levels. It is suitable for a wide range of applications including:
- Petrochemical
- Refinery
- Natural gas
- Hydrogen
- Industrial gas
- Hydrogen
- Industrial gas
- Power generation
Gas & Oxygen Analysis
An oxygen transmitter for use in:
- Inerting/blanketing liquid storage tanks
- Reactor feed gases
- Centrifuge gases
- Catalyst regeneration
- Solvent recovery
- Landfill gas
- Sewage wastewater digester gas
- Oxygen purity
A thermal conductivity gas transmitter for use in the following industries and applications:
- Metals Industry
- Petroleum Industry
- Chemical Industry
- Methane Industry
- Landfill/Biogas Industry
- Gas Production Industry
- Food Industry
An oxygen transmitter for use in:
- Glove box purge and leak detection
- Natural gas
- Semiconductor wafer machines
- Coating process machines
- Membrane air separators
- Inert welding gases
- Pure gaseous hydrocarbon streams
- Process monitoring of gaseous monomers
- Heat treating and bright annealing
The nondepleting oxygen cell is a couloumetric electrochemical oxygen sensor used for oxygen measurement in the following industries and applications:
- Petrochemical Industry
- Gas Production Industry
- Metals Industry
- Semiconductor Industry
Moisture Analysis
This multichannel analyzer measures moisture in gases and non-aqueous liquids and oxygen (optional) in gases. Designed for permanent installations, it is used in conjunction with Panametrics Moisture Image Series and M Series moisture probes for industries and applications including:
- Petrochemical
- Natural gas
- Industrial gas
- Semiconductor
- Furnace gas/heat treating
- Power generation
- Air dryer
- Pharmaceutical
- Aerospace
This Panametrics single-channel analyzer measures moisture in process gases. Designed for installation in industrial settings, it is used in conjunction with IQ.probe and M Series moisture probes for industries including:
- Industrial gas
- Furnace gas/heat treating
- Power generation
- Air dryer
- Pharmaceutical
- Aerospace
This rugged, intrinsically safe, portable hygrometer measures moisture in gases and non-aqueous liquids. It is used in conjunction with Moisture Image® Series (MIS), TF and M Series moisture probes for applications including:
- Natural gas
- Chemical and petrochemical gases
- Non-aqueous liquid applications
- Air separation plants
- Tanker preparation and filling
- Industrial gases
- Gas cylinder preparation and filling
- Shipboard applications
- SF6 circuit breakers
- Furnace gases/heat treating
- General plant/facility maintenance
The Aurora 19 analyzers have an intuitive interface that makes them easy to learn, configure and operate.
With a local service team to support them, you have the confidence of knowing that Aurora 19 analyzers are always ready for immediate moisture measurement.
With power and gas lines easily connected, the Aurora 19 moisture analyzer provides a wide range of reliable measurement with accuracy and fast response you need for immediate alerts to process upsets or out-of-compliance moisture concentrations.
This aluminum oxide moisture transmitter measures moisture concentration in gases and non-aqueous liquids from trace to ambient levels. It is suitable for a wide range of industries:
- Petrochemical
- Natural gas
- Industrial gas
- Semiconductor
- Furnace gas/heat treating
- Power generation
- Air dryer
- Pharmaceutical
- Aerospace
Liquid Flowmeter
The TransPort® PT900 is the latest generation of portable clamp-on flow meters from GE's Panametrics line of ultrasonic meters.
It capitalizes on the ruggedness and superior performance of its predecessor, the Transport® PT878, but delivers a whole new level of intuitive and user-friendly capability based on today's technology.
The AquaTrans™ AT600 flowmeter is a complete ultrasonic system for the measurement of:
- Potable Water
- Wastewater
- Sewage
- Discharge water
- Treated water
- Cooling and heating water
- Irrigation water
- Other industrial fluids
The XMT1000 is a new, cost-effective ultrasonic flow transmitter that builds on Panametrics flow expertise and on years of reliable performance from its XMT868i predecessor. It offers state-of-the-art flow measurement capability in a rugged, locally-mounted or remotemounted transmitter certified for use in hazardous areas.
Liquid Flow Measurements for a Wide Range of Applications
- Hydrocarbon liquids
- Water & wastewater
- Crude oil
- Distilled water
- Lubricating oil
- Hot/chilled water
- Diesel fuel oil
- Chemicals
- Solvents
- Beverages
- Liquified natural gas (LNG)
The PanaFlow™ LZ is a complete ultrasonic flow meter system for liquid applications. It can be used in applications such as:
- Hydrocarbon liquids
- Fuel oils
- Water
- Solvents
- Weak acid
- Most liquids
The PanaFlow™ Z3 represents the latest generation of Panametrics ultrasonic flow meters. It is a threepath meter designed specifically for dependable, accurate and repeatable flow measurement of process liquids.
With a sleek industrial design and ultra-reliable electronics, it provides operators a cost-effective choice when measurement accuracy and reliability are critical.
- Process control and monitoring
- Allocation measurement
- Batching and blending
- Transfer lines
- Cooling water lines
- Pipeline metering
- Loading/unloading
- Plant utilities
- Tank farms
- Irrigation
- Crude refined products
PanaFlow™ HT is a SIL-rated flow meter used for flow measurement of liquids in either nominal or extremely high or low process temperatures.
It is the first ultrasonic flow meter to receive SIL (Safety Integrity Level) certification.
- Coker crude distillation
- Vacuum distillation
- Crackers
- Hydrotreaters
- Visbreakers
- Crude oil
- Liquefied natural gas (LNG)
Gas Flowmeter
The TransPort® PT878GC clamp-on gas flowmeter is a complete ultrasonic flow metering system for measurement of most gases, including:
- Natural gas
- Compressed air
- Fuel gases
- Erosive gases
- Corrosive gases
- Toxic gases
- High-purity gases
- Air separation gases
The DigitalFlow™ GF868 flowmeter is a complete ultrasonic flow metering system for:
- Flare gas
- Track down or prevent losses from leakage with positive material identification
- Account for total plant throughput of material
- Reduce cost of steam usage with proportional control
- Conserve energy by eliminating unnecessary flaring
- Comply with government regulations for pollution control
- Vent gas
- Hydrocarbon gases
- Biogases
- Digester gases
Liquid Flowmeter
The TransPort® PT900 is the latest generation of portable clamp-on flow meters from GE's Panametrics line of ultrasonic meters.
It capitalizes on the ruggedness and superior performance of its predecessor, the Transport® PT878, but delivers a whole new level of intuitive and user-friendly capability based on today's technology.
The AquaTrans™ AT600 flowmeter is a complete ultrasonic system for the measurement of:
- Potable Water
- Wastewater
- Sewage
- Discharge water
- Treated water
- Cooling and heating water
- Irrigation water
- Other industrial fluids
The XMT1000 is a new, cost-effective ultrasonic flow transmitter that builds on Panametrics flow expertise and on years of reliable performance from its XMT868i predecessor. It offers state-of-the-art flow measurement capability in a rugged, locally-mounted or remotemounted transmitter certified for use in hazardous areas.
Liquid Flow Measurements for a Wide Range of Applications
- Hydrocarbon liquids
- Water & wastewater
- Crude oil
- Distilled water
- Lubricating oil
- Hot/chilled water
- Diesel fuel oil
- Chemicals
- Solvents
- Beverages
- Liquified natural gas (LNG)
The PanaFlow™ LZ is a complete ultrasonic flow meter system for liquid applications. It can be used in applications such as:
- Hydrocarbon liquids
- Fuel oils
- Water
- Solvents
- Weak acid
- Most liquids
The PanaFlow™ Z3 represents the latest generation of Panametrics ultrasonic flow meters. It is a threepath meter designed specifically for dependable, accurate and repeatable flow measurement of process liquids.
With a sleek industrial design and ultra-reliable electronics, it provides operators a cost-effective choice when measurement accuracy and reliability are critical.
- Process control and monitoring
- Allocation measurement
- Batching and blending
- Transfer lines
- Cooling water lines
- Pipeline metering
- Loading/unloading
- Plant utilities
- Tank farms
- Irrigation
- Crude refined products
PanaFlow™ HT is a SIL-rated flow meter used for flow measurement of liquids in either nominal or extremely high or low process temperatures.
It is the first ultrasonic flow meter to receive SIL (Safety Integrity Level) certification.
- Coker crude distillation
- Vacuum distillation
- Crackers
- Hydrotreaters
- Visbreakers
- Crude oil
- Liquefied natural gas (LNG)
Gas Flowmeter
The TransPort® PT878GC clamp-on gas flowmeter is a complete ultrasonic flow metering system for measurement of most gases, including:
- Natural gas
- Compressed air
- Fuel gases
- Erosive gases
- Corrosive gases
- Toxic gases
- High-purity gases
- Air separation gases
The DigitalFlow™ GF868 flowmeter is a complete ultrasonic flow metering system for:
- Flare gas
- Track down or prevent losses from leakage with positive material identification
- Account for total plant throughput of material
- Reduce cost of steam usage with proportional control
- Conserve energy by eliminating unnecessary flaring
- Comply with government regulations for pollution control
- Vent gas
- Hydrocarbon gases
- Biogases
- Digester gases